You could authorize a PVCU fascias and soffit business to do this for you or you could accomplish it yourself if you are a do it yourself lover .
The purpose of UPVC fascia and soffits on your house is to protect the roof rafters and joists from the onslaught of the united kingdoms weather. It is essential to keep the Fascia and Soffit in good condition to avoid structural damage to the concealed roof perimeter.
When working from, or in this case, near the roofline for any length of time, it's a good idea to set up scaffolding. Scaffolding is safer and more easier than working off ladders and will save a large amount of time. You can use a pair of fiberglass extension ladders with a couple of jacks to support an aluminum walkway.
Attentively lift back the foremost row of tiles to thoroughly inspect the eaves for the correct removal of old fascias, Soffits and gutter.
Pry off the fascia board along the eave and clean up any rubble behind it. fit new UPVC rafter end sprockets. This ensures a true straight endless run and in addition gives a strong fix for the new upvc fascia soffits and guttering.
install eaves guard trays which come with a unique 3 in 1 system. The rigid UPVC tray will compensate traditional bio degradable felt. It also has a disguised over fascia ventilator that will provide acceptable ventilation to the eaves.
Begin installing your PVC-U soffit and fascia with white stainless steel fittings.
You can now carefully fit new pvc-u guttering and drainpipes. Make sure you check for accurate flow rate and capacity on all guttering and downpipes during installation.
Gutter brackets are likely to hold a bit better than the spike(nail-through) fasteners. Nevertheless, both are generally used and shouldn't be a issue if the PVC-U fascia board and rafter tails are in good shape and the gutter isn't warped.
Tack the high end of the gutter in place. Using a level, slope the gutter somewhat down toward the downspout. Double-check all along the gutter to ensure it has some downward flow.
Secure the gutter and add the brackets. Nail the brackets at the rafter tails and beneath the shingles so the nail head isn't exposed. Use roof cement all around the nailhead to prevent any leaking and around the lifted shingles to avoid curling.
Now you have fitted your pvcu soffits, fascia and guttering you will have a maintenance free roof line for many years.